Pieces Laser Old tattoo easiest to remove by laser treatment?
I wanted to remove part of my new tattoo. The piece I want removed makes my tattoo look incomplete. Anyway my question is, how long should I wait before going in for removal? I got it only 2 months ago. The piece I want removed is probably 3x1 inches.
Thank you.
I got my first and only tattoo when I was 18 in 1952, and I have hated it for 57 years. Don,t bother with the math, I'm 75.
For the past 55 days, I have been removing a 57-year-old tattoo from my right forearm. I have over the years experimented with several methods to remove it. The results til now have been disappointing. Which has left a scar for each attempt.
I had a lot of modeling equipment on hand. One day a couple of months ago my thoughts went back to my tattoo and how it could be removed. I had had a new stainless steel Dremel brush, still in its package. {WalMart sells a battery operated tool like mine for less than $20.00 and a stainless steel Dremel brush for less than $3.00} After soaking it in isopropyl alcohol overnight, I chucked it into my rotary tool, smeared the tattoo with antibacterial ointment and began the removal process. I was very apprehensive and did not know what to expect. I barley touched the rotary brush to my skin. There was no pain, so I touched it again a little harder. Still no pain but this time I saw a little line of blood barely visible in the ointment. I was encouraged and went over the entire tattoo. My purpose was to place the incisions as close together as I could as long as the width of the lines of the design about 1/8 inch. The bleeding which I experienced would not have soaked a q-tip. The little microscopic parallel incisions heal individually and are too small to form visible scar tissue.
My self-inflicted scars from previous attempts went away with my tattoo.
My latest procedure was yesterday and I am not sure if I have any tattoo left, but I have not caused any scaring. .
The "Professional Laser" horror stories which I have read have bothered me to the point that I just wanted to see if I could do it without the trauma and heartache. I also wanted to prove the people wrong who declair that Lazer is the only way, the cost of which can reach into the thousands of dollars.
I have posted several photos of the progress of my removal at
http://www.flickr.com/photos/37197293@N03/
I will continue posting updates daily until it is completely gone.
Don
dfrankg@yahoo.com
Laser Pegs Dune Buggy Kit 31 Pieces Laser Pegs is the first toy construction set in the world in which each piece feeds the next piece low voltage current. Your young engineer can construct models or creatively build anything they want with the Laser Pegs. They can be used lit up or turned off. Once one peg is connected to a power source it then illuminates any other peg it is connected with. A high quality LED will run about 100 000 hours. Therefore each Laser Peg piece has a very long life expectancy. The batteries will supply the models current; however the useful life of the batteries is determined by how many Laser Pegs are attached to the power base. This is the worlds newest and most innovative set of toy building blocks. The Dune Buggy model comes with 31 Laser PegsTM three AA batteries a power unit and a manual. This is a great introduction to the Laser Pegs and gives both kids and adults an opportunity to quickly enjoy this exciting product. Kids can create many other abstract models with this single construction set. Feature:. Dimensions: Kit size: 8.5 x 6 x 2.5 inches. Kit weight: 2 lbs. Ages 7 and older.
Laser Pegs Tractor Single Kit 30 Pieces Laser Pegs is the first toy construction set in the world in which each piece feeds the next piece low voltage current. Your young engineer can construct models or creatively build anything they want with the Laser Pegs. They can be used lit up or turned off. Once one peg is connected to a power source it then illuminates any other peg it is connected with. A high quality LED will run about 100 000 hours. Therefore each Laser Peg piece has a very long life expectancy. The batteries will supply the models current; however the useful life of the batteries is determined by how many Laser Pegs are attached to the power base. This is the worlds newest and most innovative set of toy building blocks. The Tractor model comes with 30 Laser Pegs three AA batteries a power unit and a manual. This is a great first model to build because it requires the power base as the stand whereas the other models are separate from the base. This model can be tricky to build; however it is a really fun time. Kids like moving the front wheels of this tractor model. This construction set is a winner on the farm. Unique toy models but exciting to play with for hours on end. Feature:. Kit size: 8.5 x 6 x 2.5 inches. Kit weight: 2 lbs.
For ages, kid's toys have had to use quotation marks and misspellings when using the term laser. Either it's "laser" (kinda like cheese food product) or laZer (also, kinda like cheese food product), but never a real laser. Until now! Yes the SpyNet Laser Trip Wire is technically a kid's toy, but it works so well, we're guessing Junior will never be able to take it away from you. What you get with each SpyNet Laser Trip Wire is 4 pieces of defensive office security. The Laser Unit sends out a class 1 laser. When it connects to the Receiver Unit (also the part with the alarm), a beam of light is created; cross it and the alarm sounds. But just one line isn't fun! So, use the two Mirror Units to shape the laser beam around whatever you need to protect. Get more than one SpyNet Laser Trip Wire sets and make your security system extra tough. And, really, if you're worried about the kids stealing your SpyNet Laser Trip Wire, use a second set to protect the first! SpyNet Laser Trip Wire Protect your stuff with a real laser security system. Uses a class 1 laser. Multiple sets can be combined for one super awesome security system. Ages: 8 and up. Includes: Laser Unit (emitter and base), Receiver Unit (with base), 2 Mirror Units, and instructions. Batteries: 6 AAA (not included). Dimensions: Laser Unit (on base): approx. 5.63" x 5.63" x 4" Receiver Unit: 2.75" x 3.25" x 4" Mirror Unit: 2.75" x 3.25" x 3.75"
Our best selling laser pet toy now comes in a 12 piece clip strip. The laser has 2 buttons-1 has a red dot and the other is a bright LED flashlight. The header card on the clipstrip lights up to increase visibility and sales.
Our best selling laser pet toy now comes in a 12 piece clip strip. The laser has 2 buttons1 has a red dot and the other is a bright LED flashlight. The header card on the clipstrip lights up to increase visibility and sales.
On a recent archaeological expedition near the Great Pyramids of Egypt, the ThinkGeek R&D department made a yet another shocking discovery. The details will be published in a few months, but we couldn't wait to share what we found: the favorite game of the Ancient Egyptians was made of plastic and mirrors, and used lasers. Yes . . . lasers! It was called Khet. But we already made that discovery a few years ago. No, the new discovery is that the Ancient Egyptians also invented the game upgrade. Yes, we are so, so proud to present Khet 2.0 Laser Game. For those of you that loved the original Khet, you're gonna just flip for Khet 2.0, but we'll sum up game play for you who are new to the game. In Khet 2.0 Laser Game, there are four types of playing pieces, and two of them have mirrors. Game play is simple, and easy to learn, as there are only a few movement choices. The goal is to eliminate your opponent's Pharaoh. And, you eliminate the Pharaoh just like they did in olden times - by firing a red laser! And this is where Khet 2.0 kicks the game up a notch. In the original Khet, the lasers were part of the board. But in Khet 2.0, the lasers are built in to special Sphinx pieces that perch in the corner and can now rotate to change the angle of the beam (because of this change, the board is very slim and now built to travel)! Your laser is fired after your turn and bounces from mirrored piece to mirrored piece (always shooting off at a 90 degree angle). If the laser hits any piece on a non-reflective surface (with one exception we'll leave as a surprise), that piece is removed from play. If you eliminate your opponent's Pharaoh, you win. If you eliminate your own Pharaoh, you will be mocked for all time (because it is possible). Khet 2.0 Laser Game is the next generation of the best laser game of all time. Please Note: Khet 2.0 is not compatible with Khet 1.0 Add-on Pieces. Also, laser simulated in pictures to better give you an idea of game play. Khet 2.0 Laser Game An awesome game that combines chess and lasers (with a sprinkling of Ancient Egyptian flavors) into one fantastic package. Stores in box for easy travel (box has carrying handle). Ages: 9 and up. Includes: Carrying case/box, 26 pieces (two that fire lasers), game board, and illustrated instructions. Batteries: each laser piece uses 1 CR2032 battery (included). Game Board Dimensions: 13" x 13" x 0.375". Beam Splitter 2-Pack Two awesome addition pieces (one for each side) cause the laser to split into 2 beams. Instantly makes the game even more challenging. Heck, if you lined these up right, you could have 3 beams to play with.
Welcome to the world of Khet. It's the game that combines lasers with classic strategy. Players alternate turns moving Egyptian-themed pieces having two one or no mirrored surfaces. All four types of pieces (pharaoh anubis pyramind and scarab) can either move one square forward back left right or diagonal or stay in the same square and rotate by a quarter twist. Each turn ends by firing the real laser diode built into each player's Sphinx piece. The laser beam bounces from mirror to mirror; if the beam strikes a non-mirrored surface on any piece it is immediately removed from play. The ultimate goal is to illuminate your opponent's pharaoh while shielding yours from harm! 4 AAA batteries included Type: Board Games
Laser Light Gun for Wii. Minimum Order Quantity: 100 Piece/Pieces. Supply Ability: 10000 Piece/Pieces per Month. Port: Shenzhen Shekou. Place of Origin: Guangdong China (Mainland).
EA-09CL TFP Fender Trim fits: 1995-1999 Eagle Talon, 1995-1999 Mitsubishi Eclipse, 1995-1999 Plymouth Laser. EA-09CL TFP Fender Trim Features - TFP Fender Trim adds a bit of glitz to all four of you vehicle's wheel wells. Available in standard width (1 3/4" - 2") or narrow width (1 1/4") for most vehicles. Custom-shaped to your vehicle from choice grade stainless steel. Installs in 10-15 minutes with no drilling on most vehicles. Secure screw-on mounting system also provided, which requires only minor drilling. Stainless Steel Fender Trim, TFP Fender Flares. TFP Inc EA-09CL.
EA-02CL TFP Fender Trim fits: 1989-1994 Eagle Talon, 1989-1994 Mitsubishi Eclipse, 1989-1994 Plymouth Laser. EA-02CL TFP Fender Trim Features - TFP Fender Trim adds a bit of glitz to all four of you vehicle's wheel wells. Available in standard width (1 3/4" - 2") or narrow width (1 1/4") for most vehicles. Custom-shaped to your vehicle from choice grade stainless steel. Installs in 10-15 minutes with no drilling on most vehicles. Secure screw-on mounting system also provided, which requires only minor drilling. Stainless Steel Fender Trim, TFP Fender Flares. TFP Inc EA-02CL.
Account limit of 2104 requests per hour exceeded.
How a Ruby Laser Works
Whats a good way to protect your desk etc when using a laser mouse?
I might buy a piece of slate to put it on - any ideas?
...LOL...its not goimg to burn a hole through the desk...lol...what a question...lmao.
