Mount Laser Optic how much should i get for my ak?
i have a wasr 10 with side scope mount, bsa optic, recoil buffer installed, rubber but pad, clamp on bipod, 400 rounds loose in ammo can, laser cartridge bore sighter, case, and military surplus sling
how much should i get private sale or trade in price
$600-$700.
if you make that CA legal you can easily get double that. to figure out how you can make it CA legal to see to people here (who are paying $1k for a brand new cheap wasr) take a look at this flow chart:
http://www.calguns.net/caawid/flowchart.pdf
Californians needs more people selling cool stuff into the state.
Get the full accuracy potential from your M1 Carbine by replacing its handguard with a reliable CNC-machined mount for extended eye relief scopes red dot reflex and laser sights or tactical accessories. Full length low profile rail uses 1913 Picatinny pattern; provides excellent stability and allows wide field of view for fast target acquisition. Dual high-strength steel clamps secure mount to barrel forward of the gas block. No need to remove standard issue iron sights and will not interfere with case ejection. Synthetic and Israel Arms International stocks may require minor inletting in the forend to accommodate clamps. Will not fit Universal brand carbines. Mfg: Ultimak SPECS: Mount - 6061-T6 aluminum hard anodized matte black. 8-1/6" (20.5cm) long. Clamps - 4140 steel matte blue. Fits standard G.I. pattern M1 carbines without alteration. May require minor stock inletting on synthetic and I.A.I. stocks. Will not fit Universal brand carbines.
Easy-to- install mount lets you attach an optic or laser sight to your shotgun without drilling tapping or making permanent alterations to the gun. Remove the two trigger group pins (Rem.) or the ejector screw and trigger pin (Moss.) slide on the mount line up the holes and secure it with the included replacement pins. Low-profile form-fitting design looks like part of the receiver and positions the sight close to the bore axis. Seven cross-slots in the 5" rail let you install an optic Weaver top-mount rings or other accessory with plenty of flexibility in setting eye relief. Lightweight yet rugged reinforced molded polymer stands up to extreme weather conditions ranging fro Mfg: Atk SPECS: Reinforced injection-molded polymer composite Black or Realtree Hardwoods HD Camo. Includes mount button head ejector screw trigger group bolt knurled nut threaded insert nylon-tipped set screw 3⁄32" and 1⁄8" hex head wrenches and instructions. Remington fits
Easy-to- install mount lets you attach an optic or laser sight to your shotgun without drilling tapping or making permanent alterations to the gun. Remove the two trigger group pins (Rem.) or the ejector screw and trigger pin (Moss.) slide on the mount line up the holes and secure it with the included replacement pins. Low-profile form-fitting design looks like part of the receiver and positions the sight close to the bore axis. Seven cross-slots in the 5" rail let you install an optic Weaver top-mount rings or other accessory with plenty of flexibility in setting eye relief. Lightweight yet rugged reinforced molded polymer stands up to extreme weather conditions ranging fro Mfg: Atk SPECS: Reinforced injection-molded polymer composite Black or Realtree Hardwoods HD Camo. Includes mount button head ejector screw trigger group bolt knurled nut threaded insert nylon-tipped set screw 3⁄32" and 1⁄8" hex head wrenches and instructions. Remington fits
Landmark Outdoors and Yukon Advanced Optics branded products are at the vanguard of quality outdoor activity supplies and offer a wide range and variety of unique product lines. The exclusive features and benefits integrated into each product set Landmak Outdoors and Yukon Advanced Optic apart from all others and fuse high quality with an affordable price. Includes laser sight Weaver mount (2) Allen wrenches and (3) LR44 batteries. Lightweight compact and shockproof. Windage and elevation adjustable. Quick target acquisition. Up to 300 yards visibility at night. Up to 20 yards visibility in daylight.
Easy-to- install mount lets you attach an optic or laser sight to your shotgun without drilling tapping or making permanent alterations to the gun. Remove the two trigger group pins (Rem.) or the ejector screw and trigger pin (Moss.) slide on the mount line up the holes and secure it with the included replacement pins. Low-profile form-fitting design looks like part of the receiver and positions the sight close to the bore axis. Seven cross-slots in the 5" rail let you install an optic Weaver top-mount rings or other accessory with plenty of flexibility in setting eye relief. Lightweight yet rugged reinforced molded polymer stands up to extreme weather conditions ranging fro Mfg: Atk SPECS: Reinforced injection-molded polymer composite Black or Realtree Hardwoods HD Camo. Includes mount button head ejector screw trigger group bolt knurled nut threaded insert nylon-tipped set screw 3⁄32" and 1⁄8" hex head wrenches and instructions. Remington fits
Easy-to- install mount lets you attach an optic or laser sight to your shotgun without drilling tapping or making permanent alterations to the gun. Remove the two trigger group pins (Rem.) or the ejector screw and trigger pin (Moss.) slide on the mount line up the holes and secure it with the included replacement pins. Low-profile form-fitting design looks like part of the receiver and positions the sight close to the bore axis. Seven cross-slots in the 5" rail let you install an optic Weaver top-mount rings or other accessory with plenty of flexibility in setting eye relief. Lightweight yet rugged reinforced molded polymer stands up to extreme weather conditions ranging fro Mfg: Atk SPECS: Reinforced injection-molded polymer composite Black or Realtree Hardwoods HD Camo. Includes mount button head ejector screw trigger group bolt knurled nut threaded insert nylon-tipped set screw 3⁄32" and 1⁄8" hex head wrenches and instructions. Remington fits
Optic Renaissance 2 Light Optic Flush Mount2 Light flush mount fixture with pure jewels of optic crystal, featuring sturdy chrome rings with optic jewels, refracting and reflecting interesting glows of light.Requires (1) 100W T3 Halogen Bulb (Not Included)From the Optic Renaissance Collection
Flashlight/laser mount pivots and locks into five positions up to 90 degrees left or right of center allowing you to quickly reposition your laser sight or flashlight if the tactical situation dictates. Use one mount for both your rifle and pistol; spring-loaded push-button provides fast installation and removal on both Picatinny and Weaver-style rails separate locking bars included. Integral mounting ring firmly clamps 1" diameter lights or laser sights. Made from high strength durable fiber-filled polymer composite. Mfg: Command Arms Acc SPECS: Fiber-filled polymer composite black. 2¾'' (7cm) long 1½'' (3.8cm) wide 2½'' (6.3cm) high. 2.8 oz. (79g) weight. Fits 1'' O.D. flashlight/laser.
Features: Designed for use with the Aimpoint T-1/H-1 6061 T6 Machined Aluminum construction Matte black blasted and Teflon coated finish Fits AK rifles with receiver side mounted scope bases Quick Detach leverBenefits: Allows for optic to be mounted directly over the centerline of the bore as low as possible Lower 1/3 co-witness is possible with the Aimpoint T-1/H-1 Quick Detach thumb lever allows for mount to be attached or detached from the rifle quickly The lever allows the mount to return to zero each time it is removed Mfg: Rs Products Llc
Cantilever Mount with Integrated 30mm Ring and 1" Inserts, This forward offset mounting ring allows for extra mounting room for almost any 30mm or 1" optic accessory such as a flashlight, red dot or laser sight to be mounted on weaver style bases. Heavy duty 6 screw keep the optic in place and a large thumb lock screw keep the mount securely on firearm.
Extended cantilever mount provides plenty of eye relief to mount a 30mm scope or position a magnifier night vision device or other sighting accessory behind the main optic. Two quick-release levers clamp to a flattop receiver rail with unique cam action for a tight hold during recoil. Depress the locking tabs swing both levers open and the mount easily lifts off the rifle. Cross bars can be adjusted to fit almost any Picatinny or Weaver-style rail including over- or under-sized commercial rails. Levers may be positioned to open to the front or the rear to suit the operator's preference. Five heavy duty steel hex head screws (three on top two on bottom) clamp the 30mm vertically Mfg: Noveske Rifleworks Llc SPECS: 6061 T6 aluminum Type III mil-spec hardcoat anodized finish flat dark earth. Steel cross bars matte black. 6" (15.2cm) O.A.L. Requires 4" (10.2cm) of rail space. Height measured from top of rail to bottom of scope body: .87" (2.2cm) high. Distance betw
Account limit of 2104 requests per hour exceeded.
Tokyo Marui AK47
Get on Target Through Laser Bore Sighting
Whether you'll be hunting or target shooting, you'll want to get the most accurate results possible and that means adjusting your rifle scope so that it is balanced to your particular gun. That's where laser sights come in.
So you've taken the time to find a rifle scope that works for you, with all of the features you require, and made the financial investment this entails. It would be a shame to prevent yourself from getting the most out of your scope now. Don't forget to take the time to use a laser sight to help you zero in on your target.
The theory behind Laser Bore sighting is really quite simple. It's all about aligning your optical sight with the axis of your bore. This allows for optimum accuracy without having to expend extra ammunition. Since the cost of ammunition can add up, this can be extremely important when it comes to easing the burden on your wallet.
There are several different methods of bore sighting. The old school way is to do it by hand, which involves disassembling your rifle and physically making adjustments until the reticle is pointed directly at the target. This takes time and can be less than accurate if your eye is off or your hand shakes. Fortunately, there are several other methods which involve the use of sights and make the process a lot more convenient and more accurate.
A bore sighter with a collimator can mount on the end of your rifle and help to make adjustments for wind and elevation to get an accurate zero. A variation on this method is a magnetic bore sight, which mounts to your rifle with magnets. A Laser Bore sighter is the next step up from this and offers the maximum in efficiency and accuracy.
A laser sight projects a beam of light to allow you to zero in on the center of your target to align your gun. Laser sights are contained within bullet casings that fit the caliber of your gun. You simply turn the sight on and insert it into the barrel of your gun. The laser beam will then give you an immediate indication of the zero of your rifle, allowing you to make any necessary adjustments to properly align it.
About the Author
Sorry, comments for this entry are closed at this time.
Sorry, comments for this entry are closed at this time.