Meter Diode Setting

Do I need a resistor and if so what size?

I have a relay capable up to ~120v and it is triggering a household dimmer at the switch contacts. (I dismantled the dimmer to get to the switch. ) Now for some reason, the dimmer gets activated at random times - destroying my desired effect.

My SPDT relay is custom built containing 3 relatively large capacitors (in volume) and a diode. I am guessing that the relay pole is energized at a low voltage from the capacitors and passing "rouge voltage" (for lack of the correct term) to the dimmer switch - activating it and killing my effect.

Do I need a resistor or what? I don't have anything capable of Four-terminal sensing (my neighbor might) but I do have a multi-meter that has a setting with 20 ohlms.

There is a lot of ambiguity in your description.

For example what do you mean by a custom built relay? How are the capacitors and diode connected?

Why dismantle the dimmer? The relay contacts could have gone in series with it.

I am guessing that you want to trigger the relay on after the capacitors have charged to some set voltage but that the relay coil kicks in sooner than you hoped? That sounds like an application for a diac, UJT or PUT.

http://www.americanmicrosemi.com/tutorials/unijunction.htm

http://www.kettering.edu/~bguru/PEGCKTS/PUT.pdf

http://www.kettering.edu/~bguru/PEGCKTS/UJT.pdf

http://en.wikipedia.org/wiki/DIAC

Angle Meter Angle Meter $19.95 High-impact polymer angle meter is ideal for leveling setting and verifying the proper angle on milling decks drill press vises surface grinders and stock duplicators. Features a large easy-to-see scale for accurate measurements from 0 to 90 degrees in any quadrant plus a built-in magnetic base for hands-free operation on metallic objects. Measures any angle for pitch or slope and includes an easy-to-read table for converting rise and run information. Mfg: Starrett SPECS: Polymer with magnetic base. 4¼" (10.8cm) long 5⁄8" (1.6cm) wide 5" (12.7cm) high. Measures to ½ degree.

Jesse Owens Setting the 200 Meter Olympic Record at the Olympics in Berlin, Germany, 1936 $19.99 Jesse Owens Setting the 200 Meter Olympic Record at the Olympics in Berlin, Germany, 1936 - Premium Poster

US Runner Fanny Blankers Koen Setting Olympic Record of 11.2 Seconds in 80 Meter Hurdles $79.99 Mark Kauffman US Runner Fanny Blankers Koen Setting Olympic Record of 11.2 Seconds in 80 Meter Hurdles - Premium Photographic Print

(07-04-0032) COMPACT LCD METER A/F METER (LED BACK LIGHT) $223.5 Compact air fuel ratio meter" compact LCD A/F meter" for the long-awaited motorcycle became new sale. At the time and the like of carburetor setting it is the air fuel ratio meter which you can use as standard. Indicating real time air fuel ratio with the digital number with the sensor which is installed in the exhaust pipe. You be able to use auxiliary as standard of cab setting, the gap of substantial setting and of the abnormal combustion with the engine trouble it is useful to early detection. And, price and the request we have set cheaply, the compact thermo- meter stay of option (09-01-1023) using size with W55?×L30?×H10?, and the compact it is possible to install simply. ..

Digital Multi-Meter Tester by Performance Tool $10.99 Features AC/DC volt measurement, DC current measurement, resistance measurement, diode test and Ohms;For use on household appliances, automotive and a variety of hobbies;Includes 2 test leads, instruction booklet and 9 volt battery Digital Multi-Meter Tester by Performance Tool

DIODE $12 When these electrical items fail there is little choice but to renew - With this genuine Suzuki par..

Gossen Digiflash Digital Exposure Meter $199.99 This digital exposure meter features an LCD readout in 1/3-stop increments and a setting ring to easily read the shutter speed and f-stop combinations. The compact design offers easy portability.

Automotive Meter With Pc Interface $205.95 Features: ? MS-Pulse Width function to test the on-time of fuel injectors ? RS-232 PC Interface - Connect to your PC, CD/software included free of charge for viewing data on your computer. ? Min/Max function captures the high or low readings for better diagnostic capability ? Huge 2 inch high LCD display w/Bargraph and backlighting. Largest of any automotive meter! ? Blow mould case included. ? Desirable fused 20 Amp test range ? Auto Power-Off - saves battery life ? 4 Step Adjustable Trigger Level on RPM, Dwell, MS-Pulse Width, Duty Cycle and Frequency test ranges. ? Special access panel for fuses and battery ? Includes: Probe style test leads; Alligator Clip style test leads; Temperature Probe;RS-232 PC interface cable; Free CD software- Windows compatible; RPM pickup with adjustable sensitivity; Blow mold case for storage. Specifications: ? 57 Test Ranges ? Test functions: AC/DC Volts ms-Period AC/DC Amps ms-Pulse Width Ohms Temperature Capacitance Diode Test Frequency Continuity Duty CycleBy Electronic Specialties.

Evolved 70018 Harvest Ph Meter $27.39 The best way to ensure your plants reach their full potential is by determining if you have the proper soil conditions. The Harvest pH Meter not only indicates the amount of alkalinity or acidity in the soil but also measures moisture content and light amounts.DIRECTIONS. Set the button on the front of the meter to the desired measurement setting for pH Moisture or Light. Insert the probes approximately 6 inches into the soil. Wait one minute and then take reading. Use these measurements as a guide to create the proper soil conditions for your plantings.

FLUKE 88V Stand Alone 88V Meter Only $456.06 The Fluke 88V has improved measurement functions troubleshooting features and accuracy to solve more problems on conventional and hybrid vehicles. The 88V is the most powerful automotive multimeter ever offered by Fluke. In addition to having all standard multimeter features like the ability to measure voltage current continuity and resistance the 88V can perform diode test and pulse width measurements. This meter can take current measurements up to 20A for 30 seconds and 10A continuously. The optional magnetic hanger lets you attach the meter to most steel surfaces for easy setup and viewing. The 88V is designed to be used in high energy environments like those found on hybrid vehicles.

3 1/2 Digital Clamp Meter (Black) $12.69 - Fashionable design, top quality and portable. - High accurate & superior reliable digital multi-meter on the market, designed for use by electricians, technicians, serviceman and hobbyists, etc. - 3 1/2 digits LCD with a max. reading of 1999. - AC current function. - AC/DC voltage measurement. - Max Display: 1999 auto polarity display - Measure Method: Double integral A/D switch implement - Sampling Speed: 2 times per second - Over-load Indication:"1" is displayed - Operating Environment: 0¡ãC~40¡ãC, under

Light Meter with Pouch LX010BS $29.99 Overview:Max range: 100,000 LuxLarge LCD displayInnovative model look designNew type light sensor with angle adjustingInternational standard caliber of lightingPackage Contents:1 x Carry case 1 x User manual 1 x Lux MeterSpecification:DISPLAY: 3-1/2 digit LCD.Repeatability: -2%Temperature Characteristic: -0.1%/CMeasuring Rate: Approximately 2.0time/sec.Photo detector: One silicon photo diode with filter.Operating Temperature and Humidity: 0 °C to 40°C(32F to 104F) 0 to 70% RH.Storage Temperature and Humidity: -10°C to 50°C(14F to 122F) 0 to 80% RH.Power Source: One 9Volt BatteryWeight Approx:128.3gSize Approx:15 x 14 x 2.5 cm

Greenlee Textron Greenlee Textron Digital Volt Multi Meter DM-20 $19.62 Digital volt multi meter Use to measure voltage, check batteries, and measure the current of small electronic circuits AC/DC voltage, DC amperage measurement Built-in test leads and audible continuity and diode tests Tests 1.5V and 9V batteries Limited lifetime warranty Brand #: Greenlee Textron DM-20 UPC: 783310120377 Keywords: tester digital multi electrical meter volt ac dc voltage circuit

Cl100 - 600A, Ac Clamp Meter, Backlit Display & Worklight, Diode Test, Continuity, Includes Case, Test Leads, & Batteries. $78.92 [BreakPack_139535] UPC: 92644692000 11.25L x 6W x 3H 1.15 LB

UV Hawk 2 Pocket UV Intensity Meter $25.95 Measures the intensity of sunlight and alerts you of overexposure to sun. Better SPF than sorry. Meter measures intensity and tells you when to cool it. Unless you're George Hamilton, you know that overexposure to the Sun's UV rays can cause skin aging, skin cancer, and other health problems. This meter can help protect you and your kids. It measures UV intensity and indicates the time remaining before overexposure, based on your skin type and SPF setting. Has audible alarm and waist band clip.

Account limit of 2104 requests per hour exceeded.

Zinc Negative Resistance 80 Meter CW Transmitter.

LCD Monitor Problems - Easy Way To Repair It

Today's article talks about repairing the CMV 19" LCD Monitor problems model CM-922D. The complain was no power as what the customer told me. This power supply was not built into the circuit thus it need an external power adapter to power it up. The input to the LCD Monitor is 19V with 3.1 Amp from the adapter. Since the complain was no power, we have to test it out to check if the power adapter is at fault or the LCD Monitor.

The ac supply was plugged in to the power adapter and I could see the power LED was lighted up. Checking the output voltage of the power adapter I got about 19 volts which is good. Even though the LED has lit and correct output voltage, this doesn't mean that the power adapter can maintain when there is a load (the LCD Monitor) connected to it. I once came across a Compaq 17" LCD Monitor that have a precise output voltage from the power adapter but when connected to the Monitor, the display appeared for a fraction of a second before shutting down. Usually in this case, your experienced would tell you that it could be the inverter circuit are faulty or the lamps have problem. You would be surprised that the actual cause of the shutdown was due to the power adapter. It can't sustain the output voltage when there is a load on it.

This kind of fault was normally due to a bad filter capacitors located at the output of the secondary circuit. If you have ESR meter, you can actually locate the defective electrolytic capacitors fast. If you don't have the meter, just direct replace the caps. As mentioned in my previous repair articles, to confirm if the power adapter is truly working or not you need a light bulb to act as a load. Make sure the power LED light doesn't blink whenever the light bulb is connected. Even if it blinks one time, this proves that the regulation is not good and need to be check entirely. In the above china made LCD Monitor, the power adapter work perfectly fine!

Since I have already confirmed that the power adapter is good, my focus now was on the LCD boards. Removing this cover was very easy and you can easily access to the board when the metal casing was removed. The first thing that I checked was the SMD fuse located in the main board. If the fuse opens then there would be no supply to the ADC/SCALAR and the CPU IC thus the power LED would not light! Checking this SMD fuse was rather simple as the method of checking it is the same like a normal fuse. Use either an analog or a digital meter set to ohms range or continuity check. You can check the fuse while it is still in circuit. Yes, the fuse was found to be open circuit.

Now there is one question that needs to be answered by us. What makes the fuse to go open circuit? Well from what we have known about electronic repair, there are three possibilities as why a fuse opens circuit. First, the fuse can become open circuit due to its lifespan. Some fuses can last for many years while some only couple of years. In other words, the life span of a fuse depends on the qualities of the materials used. Secondly, the external factor such as a surge causing the fuse to open circuit in order to protect the main board. Thirdly, the main board itself have problem (such as a shorted IC's and other electronic components) that caused the fuse to open circuit.

If the LCD Monitor problems falls in the first and the second categories then replacing only the fuse will definitely solve the problem. However, for this LCD Monitor, replacing only the fuse didn't work at all and the fuse open circuit again. You have only two choices to solve this kind of problem. First you can use an external regulated power supply as explained in my previous repair articles and connect the negative output of the power supply to ground and the positive to the fuse (the line that leads to other circuitry) in order to detect the short circuit. Slowly vary the output voltage and monitor the current drawn. Once the current drawn about a amp or two, now place your finger to any electronic components in the main board. If you found any components that get very hot then that is the cause of the short circuit.

In this article, I'm going to do it differently to detect the short circuit. Are you ready? Now instead of replacing the fuse with the exact rating which is 3 amperes, I replaced it with a 5 amperes fuse. The purpose for me to put the 5 amp fuse instead of the 3 amp fuse was because "if the fuse doesn't blow then the component that have short circuit would blow". Do you get the idea? Three things can happen when you use this way to force out the culprit. First the power adapter may shut down due to heavy current draw from the main board. Second, the short circuit electronic components (either be a IC, diode, capacitors, transistor and etc) will get hot and you can quickly locate it easily by touching them. Remember don't on it for too long otherwise if the shorted components get too hot it will go open circuit and now you will have a hard time to locate the fault. Third, you may hear a pop sound and spark from the shorted component. Trace from where the spark came from and you can easily identify the location and sometimes to the actual component that generate the spark.

For the above LCD Monitor, I actually saw a small spark at the top part of the main board once the power input jack was connected. It prompted me to the exact location and when I check the SMD ceramic capacitor (that generated the spark underneath it) with analog meter set to X 10 K ohm range; it actually developed a slight short circuit. Replacing only the fuse and the SMD ceramic capacitor solved the no power problem in this 19" LCD Monitor. This Monitor uses the inverter IC (OZ960G), A1084-25CM (2.5 volts voltage regulator), AMC1117-3.3 (3.3 volts voltage regulator), ADC IC (MST8136B) and CPU IC (MYSON MTV312MV64).

Conclusion-There are always options as to which methods that you want to use to detect the short circuit. If you prefer the latter one, then I suggest you to take some photo shots first before anything really burnt out beyond description. With the photos, at least it will give you some hints of what the components might be or even the part numbers. Well, there's always an interesting way to solve electronic problems and this is one of the reason that I like electronic repair so much because you can always act as a detective to find out the culprit-real satisfaction! Oh! By the way, you can use the above method to any other electronic equipment and it is not limited only to problems repair. Have a great hunt my friend!

About the Author

Check out the two links below. You will be pleasantly surprised to find out that LCD and Electronic Repairs are so Easy and Highly Profitable for even a novice. You can learn the repairing secrets easily.

Find out How to Repair Any LCD Monitor - It is a breeze!

Learn the Secrets of Testing Electronic Components.