Driver Amplifier

Are there horn drivers in amplifiers?

i'm trying to make a voicebox and i need a horn driver i have an amp and i don't want to take it apart until i have a good knowledge of whats in it. are there horn drivers in most amps?

No - virtually all amplifiers have a single driver, normally 8-12 inches in diameter, run fullrange.

Horn drivers are much more fragile than bass drivers and unless carefully used, would soon be damaged by the distortion from the amplifier.

Amplifier $12.49 Amplifier

The Driver $5.99 The Driver

Gretsch G5222 Electromatic Amplifier $195 Gretsch G5222 Electromatic Amplifier Five watts. Two tubes. Two inputs. Too cool! Designed by guitarists, the low-output, easy-to-record Electromatic G5222 guitar amp is ideal for small-room jam sessions and recording projects. Crank the amp's volume and adjust the guitar's controls for a variety of sounds. Not only does it spank, sparkle and growl, but the visual factor is undeniably Gretsch. Gretsch Guitars Electromatic G5222 5W 1x6 Tube Guitar Combo Amp Features: Wattage: 5 watts Impedance: 4 ohms Speaker: One 6", 4 ohm Special Design driver with ceramic magnet Channels: Two (High and Low Sensitivity) Controls: Single volume control Extension Jack: External speaker output Inputs: High-gain and low-gain inputs Handle: Leather strap handle Get Your Gretsch G5222 Electromatic Amplifier Today!

Hartke KM200 Keyboard Amplifier $549.99 The Hartke KM200 Keyboard Amplifier finally gives the keyboard player some much-needed attention. The KM200 is a powerful full-range, 2-way professional monitoring system. Sonically, keyboards and electric basses are similar in many ways. Harkte found that their legendary aluminum cones do for keyboards exactly what they do for bass: Namely pump out crisp, rich, beautiful tone. Hartke KM200 Keyboard Amplifier Features 200 watts 4 channels Innovative Kickback 2-way enclosure 15-inch aluminum cone woofer 1-inch titanium compression driver 4 stereo channels (8 inputs) including 1 Mic input 7-band graphic EQ Independent Local, PA, and Headphone bus section Hartke KM Series Amplifiers Gear fact: The best keyboard amps make the best electronic drum amps and Hartke KM Series combos deliver it all from bass drum to crash cymbal. Powerful, compact, and able to handle anything that electronic drum kits can dish out, KM Series combos feature plenty of clean power, multi-channel flexibility, and custom designed Hartke aluminum drivers for performance you can rely on as near field drum monitors or back line reinforcement for your electronic kit. KM60 – 60 watts, 10-inch Hartke aluminum driver, ceramic HF tweeter, 4 mono line level input channels (XLR/mic input on Chan. 1), 7- band graphic EQ, XLR balanced output for connection to PA or recording board, headphone output. KM100 – 100 watts, 12-inch Hartke aluminium driver, 1-inch titanium compression HF driver, 4 mono line level input channels (XLR/mic input on Chan. 1), 7- band graphic EQ, XLR balanced output for connection to PA or recording board, headphone output. Kickback cabinet design. KM200 – 200 watts, 15-inch Hartke aluminum driver, 1-inch titanium compression HF driver, 4 stereo line level channels (XLR/mic input on Chan. 1), 7-band graphic EQ, stereo XLR balanced direct outputs for connection to PA or recording board, headphone output. Kickback cabinet design.

Hartke KM60 Keyboard Amplifier $349.99 The Hartke KM60 has 60 watts of power driving a 10' aluminum cone driver working with a ceramic tweeter, fit in a rugged enclosure, giving you a powerful full-range 2-way professional monitoring system. For players with multiple keyboards and sound modules an additional mixer isn’t needed because the KM60 has one built-in. The mixer has a Mic/Line input on channel 1, as well as three additional line inputs, and a stereo Aux in. The amplifier also features a 7-band graphic equalizer, and an XLR direct output. The KM60 is easy to transport and the solid construction makes it a reliable performer from night-to-night and venue-to-venue. The Hartke KM60 keyboard amplifier offers all the newest concepts in Keyboard amplification. Here are some of the main features: Four Channel Keyboard mixer amplifier with 2-way speaker system. Microphone input, plus 3 additional mono input channels. 60 Watts of clean Hartke power delivered to its 2-way internal speaker system. For rocking lows, the KM60 employs a 10-inch, custom designed Hartke Aluminum Cone Low Frequency Drive Unit To capture and project the high frequencies of your keyboard rig, the the KM60 utilizes a ceramic tweeter A 7-band Graphic Equalizer is provided to shape the overall tone of the keyboard monitor. Rugged construction makes the KM60 eminently road-worthy. Three year extended warranty.

Rane DA216A Distribution Amplifier $379 Rane DA216A Distribution Amplifier The Rane DA 216a Distribution Amplifier is a two-input, sixteen-output splitter/distribution amplifier. The DA 216a is capable of providing sixteen discrete balanced outputs from one or two balanced mic-level or line-level inputs. The level of each output is individually adjusted via one of the sixteen screwdriver Output Level controls on the front panel. Each output may be assigned to either or both inputs via front panel accessible slide switches. The Master A and B Level controls affect the overall level of each input. In other words, they allow all assigned outputs to be turned up or down at once. LEDs indicate an Overload (OL) at either the inputs or at the internal gain stages. Each input is set to either Mic or Line level via the rear panel Input Pad pushbutton. The Input Gain pushbutton switches provide a microphone input with +60 or +40 dB of gain, or a line input with +20 or 0 dB of gain. With Input Gain, Master Levels and Output Levels, any reasonable input signal may be adjusted to a nominal +4 dBu and still have 17 dB of headroom. The Phantom Power switch provides +15 VDC for condenser microphones. Any input assigned to line-level has this phantom voltage turned off automatically. A rear-panel LED indicates when the Phantom Power is engaged. Each output stage incorporates a high-current balanced output line driver for driving long lines with optimal performance.

Power Amplifier $182.94 Power Amplifier Power Amplifier

PAC Line Driver with Bass Boost $36.99 Bring out the best in your car audio setup with this line driver that will double the preamp signal coming from your in-dash deck into your amplifier and increase bass response by up to 12dB.

Vocopro ASP-8909 Amplifier Speaker Package $1049 Vocopro ASP-8909 Amplifier Speaker Package DA-8909RV 360W Karaoke Mixing Amplifier: Professional Mixing Amplifier with Vocal Enhancer 360W Max power output at 4 ohms Built-in vocal enhancer to add definition 13 Step digital key controller with auto reset Digital echo with repeat and delay controls 3 Microphone inputs with individual volume controls 4 Audio inputs 3 Video inputs Dimensions: 18"L x 20"W x 11"H SV-600 12" Karaoke Speakers: Pair of 12" 3-Way Vocal Speakers Peak: 300 watts RMS: 150 watts Dual 3" Midrange driver for enhanced fidelity PTC Protection circuitry prevents against blown speakers Metal speaker grilles included Impedance: 8 ohms Sensitivity: 90dB Frequency response: 40 - 20,000Hz Dimensions: 32"L x 25"W x 20"H SS-88 Speaker Stands (2): Stand top adjusts from 1-3/8" to 1-1/2" to fit most speakers Adjustable height from 42" to 82" Black finish Speaker Cables (2): Total Package Weight: 131lbs Get Your Vocopro ASP-8909 Amplifier Speaker Package Today!

Roland KC350 Keyboard Amplifier $499 Now with Subwoofer Output! The newest member of Roland's KC-Series of amplifiers, the KC-350 maintains Roland's design concepts and superb sound quality. The subwoofer output connects to the new Roland KCW-1 Powered Subwoofer for some serious low end. The KC-350 provides 120-watt output, a 12' woofer with a horn driver, 4 (stereo) input channels, an XLR microphone input, an Aux input (RCA), 3-band EQ, and a 1/4' line out. The affordable price makes the KC-350 ideal for small-stage performances and for on-stage monitoring. Features Stereo mixing keyboard amplifier with 120-watt/12� speaker and horn tweeter Output Select feature and convenient Shape switch for tonal adjustment 3-band EQ and Subwoofer output compatible with new KCW-1 1/4� phone output for connection to recording devices Stereo Link In/Out for chaining to KC-350s for stereo applications When choosing a keyboard amplifier, make sure it measures up to this: Up to 4-Channel Mixing All KC amplifiers feature a flexible mixing section designed with the performing musician in mind. Roland's flagship models feature up to four stereo inputs, and all KC amps include a Microphone input and stereo Auxiliary input for connecting CD players. Stereo Link Capabilities The KC-350 and KC-550 include Roland’s Stereo Link feature for chaining two amplifiers. Using a single cable, you can connect two KC amps for true stereo sound while controlling them both from the amp nearest you on stage. Subwoofer-Ready Want more low end? Simply add an optional subwoofer like Roland’s new KCW-1. Connections are easy, thanks to the Subwoofer output found on all new KC amps. Now even the most affordable models can sound huge! Made for the Road KC amps are built for life on the road. All models have built-in handles for easier transportation (the KC-550 also includes casters) and a rugged design with heavy-duty carpeting, protective edges and an all-metal grille.

DA216S Distribution Amplifier $439 The Rane DA216S Distribution Amplifier is a two-input, sixteen-output splitter/distribution amplifier. The DA216S is capable of providing sixteen discrete balanced outputs from one or two balanced mic-level or line-level inputs. The level of each output is individually adjusted via one of the sixteen screwdriver Output Level controls on the front panel. Each output may be assigned to either or both inputs via front panel accessible slide switches. Each output stage incorporates a high-current balanced output line driver for driving long lines with optimal performance. The Master A and B Level controls affect the overall level of each input. In other words, they allow all assigned outputs to be turned up or down at once. LEDs indicate an Overload (OL) at either the inputs or at the internal gain stages. Each input is set to either Mic or Line level via the rear panel Input Pad pushbutton. The separate Input Gain pushbutton switches provide a microphone input with +60 or +40 dB of gain, or a line input with +20 or 0 dB of gain. With Input Gain, Master Levels and Output Levels, any reasonable input signal may be adjusted to a nominal +4 dBu and still have 17 dB of headroom. The Phantom Power switch provides +15 VDC for condenser microphones. Any input assigned to line-level has this phantom voltage turned off automatically. A rear-panel LED indicates when the Phantom Power is engaged. The DA216S improves on the previous DA 216 model with an internal universal voltage power supply, operable anywhere you can plug into 100-240 VAC.

Amplifier Worship $12.49 Amplifier Worship

Hartke AK115 Bass Guitar Amplifier Cabinet $399.99 Offering exceptionally warm tone, natural coloration, and awesome power, the Hartke AK115 Bass Guitar Amplifier Cabinet features a custom crafted paper cone driver and a specially tuned enclosure. The AK115 houses one 15 inch 400 watt paper cone driver to ensure deep, low frequencies push through with power and clarity. For enhanced performance on the top end, the AK115 also employs a 1 inch titanium compression driver, effectively rounding out the full range of tonal dimensions that can be produced by the bass guitar. Hartke AK115 Bass Guitar Amplifier Cabinet Features One 15 inch 400 watt paper cone driver 1 inch titanium compression driver Specially tuned, ported cabinet design Parallel Speakon and 1/4 inch inputs High frequency attenuation switch (On, -6 dB, Off) Removable casters The cabinet also provides both parallel Speakon and 1/4 inch inputs for true connecting convenience. The AK115 has the perfect enclosure to aid in proper dispersion and complement the sound of its speakers. Its specially tuned, ported cabinet design was specifically engineered to extend low frequencies and provide better bass projection, ensuring all the power and tone of the paper drivers is dispersed with great precision and articulation. Plus, with its rugged construction and removable casters, the AK115 is built tough and ready for the road.

Behringer Ultratone K1800FX Keyboard Amplifier $271.99 The Behringer K1800FX Ultratone is an ultra-flexible, 180-Watt, 4-channel Keyboard Amplifier and PA System with digital effects and FBQ Feedback Detection. With 180 Watts of power, you’ll never run out of horse power! This 4-channel PA and keyboard amplifier enclosed in a bass reflex cabinet has a special, beefed up 12-inch BUGERA™ woofer and a custom-made 1-inch tweeter, delivering clear, clean sound that’s ideal for larger gigs. Behringer has included an internal 24-bit digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects. Their revolutionary FBQ Feedback Detection System immediately indicates any feedback frequency and lets you combat feedback at your finger tips. Enjoy full 4-channel stereo operation with separate volume and FX Send controls per channel, plus there is an additional XLR mic input on channel 1 for direct connection of dynamic microphones. Use the dedicated 7-band graphic EQ to give your sound your very own edge. All in all, the ULTRATONE K1800FX offers a perfect balance of power and value in a sturdy, gig-ready package - at an unbelievable price! Behringer K180FX Ultratone Features Ultra-flexible 180-Watt 4-channel PA System and Keyboard Amplifier Powerful 12-inch BUGERA™ woofer and custom-made 1-inch driver for ultimate sound reproduction Integrated 24-bit digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies Full 4-channel stereo operation with separate Volume and FX Send per channel Additional XLR mic input on Channel 1 for direct connection of dynamic microphones Dedicated 7-band graphic EQ for awesome sound shaping Balanced stereo XLR DI with Ground Lift switch for direct connection to your mixing console Main section with FX Return level, Master Volume, Phones level and Shape switch Link output allows linking to a slave amplifier for true stereo operation Subwoofer output for ultimate low-end power CD input allows you to play along to your favorite music Separate headphone output - perfect for quiet practicing High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany

Behringer Ultratone K3000FX Keyboard Amplifier $326.99 The Behringer K3000FX Ultratone is an ultra-flexible, 300-Watt, 4-channel Keyboard Amplifier and PA System with digital effects and FBQ Feedback Detection. With 300 Watts of power, you’ll never run out of horse power! This 4-channel PA and keyboard amplifier enclosed in a bass reflex cabinet has a special, beefed up 15-inch BUGERA woofer and a custom-made 1-inch tweeter, delivering clear, clean sound that’s ideal for larger gigs. Behringer has included an internal 24-bit digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects. Behringer's revolutionary FBQ Feedback Detection System immediately indicates any feedback frequency and lets you combat feedback at your fingertips. Enjoy full 4-channel stereo operation with separate volume and FX Send controls per channel, plus there is an additional XLR mic input on channel 1 for direct connection of dynamic microphones. Use the dedicated 7-band graphic EQ to give your sound your very own edge. All in all, the ULTRATONE K3000FX offers a perfect balance of power and value in a sturdy, gig-ready package - at an unbelievable price! Behringer K3000FX Ultratone Features Ultra-flexible 300-Watt 4-channel PA System / Keyboard Amplifier Powerful 15-inch BUGERA woofer and custom-made 1-inch driver for ultimate sound reproduction Integrated 24-bit digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies Full 4-channel stereo operation with separate Volume and FX Send per channel Additional XLR mic input on Channel 1 for direct connection of dynamic microphones Dedicated 7-band graphic EQ for awesome sound shaping Balanced stereo XLR DI with Ground Lift switch for direct connection to your mixing console Main section with FX Return level, Master Volume, Phones level and Shape switch Link output allows linking to a slave amplifier for true stereo operation Subwoofer output for ultimate low-end power CD input allows you to play along to your favorite music Separate headphone output - perfect for quiet practicing High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany

Behringer Ultratone K900FX Keyboard Amplifier $238.99 The Behringer K900FX Ultratone Keyboard Amplifier is an ultra-flexible, 90-Watt, 3-channel Keyboard Amplifier and PA System with FX and FBQ Feedback Detection. With 90 Watts of power, you’ll never run out of horse power. This 3-channel PA/keyboard amplifier enclosed in a bass reflex cabinet has a special, beefed up 12-inch BUGERA woofer and a custom-made 1-inch tweeter, delivering clear, clean sound that’s ideal for larger gigs. Behringer has included an internal 24-bit digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects. Their revolutionary FBQ Feedback Detection System immediately indicates any feedback frequency and lets you combat feedback at your finger tips. Enjoy full 3-channel operation with separate volume and FX Send controls, plus there is an additional XLR mic input on channel 1 for direct connection of dynamic microphones. Use the dedicated 5-band graphic EQ to give your sound your very own edge. All in all, the ULTRATONE K900FX offers a perfect balance of power and value in a sturdy, gig-ready package—at an unbelievable price! Behringer K900FX Ultratone Features Ultra-flexible 90-Watt 3-channel PA System / Keyboard Amplifier Powerful 12-inch BUGERA woofer and custom-made 1-inch driver for ultimate sound reproduction Integrated 24-bit digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies Full 3-channel operation with separate Volume and FX Send per channel Additional XLR mic input on Channel 1 for direct connection of dynamic microphones Dedicated 5-band graphic EQ for awesome sound shaping Line output for direct connection to your mixing console Main section with FX Return level and Master Volume Subwoofer output for ultimate low-end power CD input allows you to play along to your favorite music Separate headphone output - perfect for quiet practicing Integrated 35-mm pole socket for stand mounting and use as PA System High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany

Hartke B600 Bass Guitar Combo Amplifier $249 The Hartke B600 Bass Guitar Combo Amplifier feature a 12-inch bass driver and 60 Watts of power in a convenient kickback cabinet. Complete tone shaping is achieved with 3 bands of EQ and Hartke's adjustable Shape circuitry. Like other B Series combos, the B600 features a dedicated effects loop, line level out, a buffered input and a headphone output. Hartke B600 Features and Specifications 1x12-inch Paper driver Power: 60 Watts Effects Send and Return Signal-To-Noise: 65 dB Dynamic Range: 80 dB Dimensions: 19 (H) x 18.5 (W) x 14.6 inches (D) Weight: 39.5 lb.

Hartke VX3500 Bass Guitar Combo Amplifier $749.99 The Hartke VX3500 - Straightforward tone and power for working bassists! OK, we admit that designing the Hartke VX3500 Bass Combo Amplifier was a bit of a no-brainer. Take Hartke's best selling head - the 3500; mate it to the incredible sounding Hartke VX410 cabinet and BANG! Instantly you have an awesome combination of power and sound, not to mention the best value in bass combo amplifiers. It is the ultimate 350 Watt bass combo, perfect for any style of bass playing. Why? That's easy, because the Hartke VX3500 Amplifier isn’t JUST a great combo. It's a no-compromise way to buy the absolute best in bass equipment in one great sounding Hartke package. Hartke VX3500 Bass Guitar Combo Amplifier Features 3500 amplifier section with 350 Watts of classic Hartke power Amp section features tube and solid state preamps, bass, treble and contour controls, 10-band graphic EQ and variable compression Cabinet features 4 x 10 inch traditional paper cone drivers and a high frequency compression driver Solid braced cabinet construction, recessed side handles, and heavy duty casters

Account limit of 2098 requests per hour exceeded.

Digitech X Series TONE DRIVER overdrive guitar effects pedal demo w SG & Jaguar Jr amp

Best Amplifier for Sony 5.25" Two-way Bookshelf Speakers, SS-B1000?

Create a soothing atmosphere with rich, room-filling sound from the Sony performance bookshelf speakers SS-B1000.
# 5-¼" H.O.P-cone woofer
# 1" Nano Fine balanced dome tweeter
# Sound reproduction to 50kHz
# 120 watts maximum input power
# Frequency response from 80-50kHz
Speaker System
Speaker Type: 2-way - passive
Response Bandwidth: 80 - 50000 Hz
Output Features: Bass Reflex
Connectivity Technology: Wired
Detachable Grilles: Yes
Recommended Placing: Bookshelf
Max (RMS) Output Power: 120 Watt
Input Impedance: 8 Ohm
Sensitivity: 87 dB
Connections
Connector Type: 1 x speakers input ( click-fit x 2 )
Speaker System Details
Speakers Included: 2 x right/left channel speaker - 2-way - 80 - 50000 Hz - 8 Ohm - bookshelf - wired
Driver Details: Right/left channel speaker : 1 x woofer driver - 5.25" - Highly Oriented Polyolefine (HOP) ¦ Right/left channel speaker : 1 x tweeter driver - 1" Thanks for your help.

First off, I had to laugh when reading these specifications. Leave it to the retards at Sony to write such asinine specs.

For instance, they actually pointed out in the 8th line that what you are looking at is a "speaker system". Wow. I wouldn't have guessed. And people wonder why I urge them to stay away from Sony.

But on a more serious note, there are litterally hundreds, if not thousands of amplifiers that will power these speakers perfectly fine. Since you're not dealing with high end speakers, you don't need to worry are a high end amplifier that produces awesome sound since the sound will obviously be limited by the capabilities of the speakers themselves.

The two most important aspects of the speakers you want to take into consideration is the wattage and the impedance. The impedance in this case is 8 ohms, which means that almost any home audio receiver will be compatible. The max power output is 120 watts, so I would get a receiver that is rated to at least 100 to 110 watts per channel.