![]() |
![]() |
C90306 NRC Newport Laser Optics Optical Breadboard Table (39-5/16" Square) | ![]() |
0 Bid | US $749.99 | 1d 1h 16m |
| Powered by phpBay Pro |
![]() |
![]() |
Optical Mounting Base: Mini Breadboard. 4 in. x 5 in. x 7/16 in. | ![]() |
![]() |
US $10.98 | 11d 21h 7m |
![]() |
Optical Mounting Base: Mini Breadboard. 4 in. x 4 in. x 7/16 in. | ![]() |
![]() |
US $8.98 | 5d 16h 43m |
![]() |
5 Riser blocks drilled and tapped for photonics, laser, or breadboard use | ![]() |
![]() |
US $75.00 | 1d 7h 43m |
![]() |
11 Asstd aluminum pcs drilled and tapped for photonics, laser, or breadboard use | ![]() |
![]() |
US $125.00 | 1d 8h 33m |
![]() |
TMC Optical Table with Breadboard 30" x 36" | ![]() |
![]() |
US $899.00 | 25d 18h 4m |
![]() |
TMC 36" x 24" Optical Breadboard Optics Table 2" Thick 1/4-20 Tapped Hole Grid | ![]() |
![]() |
US $749.99 | 22d 6h 45m |
![]() |
Newport Optics (5 X 2-foot, 2" Thick) Heavy-Duty Breadboard (135lbs) $1,300 | ![]() |
![]() |
US $795.00 | 28d 18h 10m |
![]() |
ThorLabs Aluminum Breadboard. 12 in x 18 in x 3/4 in. MB1218 (#1) | ![]() |
![]() |
US $119.98 | 26d 21h 55m |
![]() |
Laser Table Bread Board Leg Supports NewPort New Focus | ![]() |
![]() |
US $499.00 | 19d 18h 17m |
![]() |
ThorLabs Aluminum Breadboard. 6 in x 6 in x 1/2 in. MB8 | ![]() |
![]() |
US $32.00 | 26d 22h 1m |
| Powered by phpBay Pro |
Bread Board

My circuit diagram has a +9-12V source needed and also ground symbols.How do I set this up on a bread board?
+9-12V means supply a voltage from 9v to 12V. (The dash doesn't mean negative in this case)
The ground symbol is sometimes referred to as 0V. Most of the time you connect the negative of the battery to ground.
Each terminal of the battery will be connected to its own buss which runs lenghtwise along the breadboard.
If you are using a solderless breadboard (see link) there are 1or 2 rows running lenght wise near the edges which are inter-connected together along the entire lenght of the board. These are BUSS connections and are typically used to connect power to. (positive on the top buss and negative to the bottom buss. ) As you insert IC's in the center section you can use a short piece of wire to attach the power pins to the appropriate buss.
![]() |
![]() |
C90306 NRC Newport Laser Optics Optical Breadboard Table (39-5/16" Square) | ![]() |
0 Bid | US $749.99 | 1d 1h 15m |
| Powered by phpBay Pro |
![]() |
![]() |
Optical Mounting Base: Mini Breadboard. 4 in. x 5 in. x 7/16 in. | ![]() |
![]() |
US $10.98 | 11d 21h 7m |
![]() |
Optical Mounting Base: Mini Breadboard. 4 in. x 4 in. x 7/16 in. | ![]() |
![]() |
US $8.98 | 5d 16h 43m |
![]() |
5 Riser blocks drilled and tapped for photonics, laser, or breadboard use | ![]() |
![]() |
US $75.00 | 1d 7h 43m |
![]() |
11 Asstd aluminum pcs drilled and tapped for photonics, laser, or breadboard use | ![]() |
![]() |
US $125.00 | 1d 8h 33m |
![]() |
TMC Optical Table with Breadboard 30" x 36" | ![]() |
![]() |
US $899.00 | 25d 18h 4m |
![]() |
TMC 36" x 24" Optical Breadboard Optics Table 2" Thick 1/4-20 Tapped Hole Grid | ![]() |
![]() |
US $749.99 | 22d 6h 45m |
![]() |
Newport Optics (5 X 2-foot, 2" Thick) Heavy-Duty Breadboard (135lbs) $1,300 | ![]() |
![]() |
US $795.00 | 28d 18h 10m |
![]() |
ThorLabs Aluminum Breadboard. 12 in x 18 in x 3/4 in. MB1218 (#1) | ![]() |
![]() |
US $119.98 | 26d 21h 55m |
![]() |
Laser Table Bread Board Leg Supports NewPort New Focus | ![]() |
![]() |
US $499.00 | 19d 18h 17m |
![]() |
ThorLabs Aluminum Breadboard. 6 in x 6 in x 1/2 in. MB8 | ![]() |
![]() |
US $32.00 | 26d 22h 1m |
| Powered by phpBay Pro |
![]() |
![]() |
Heathkit Electronic Breadboard Model ET-3300 | ![]() |
3 Bids | US $36.00 | 20h 49m |
![]() |
3v 3.3v 5v Power Supply Module Adapter For SYB-130MB-102 Breadboard | ![]() |
![]() |
US $2.57 | 11d 22h 10m |
![]() |
3.3V/5V Dual Output Linear Regulator Breadboard Power Supply (with heat sinks) | ![]() |
![]() |
US $9.95 | 8d 19h 34m |
![]() |
POWERED SOLDERLESS BREADBOARD BY McMAX COMPANY TEST EQ. | ![]() |
![]() |
US $49.99 | 2d 7h 26m |
![]() |
Universal 800 position Points Solderless Project PCB Breadboard MB-102 NEW | ![]() |
![]() |
US $4.99 | 23d 9h 46m |
![]() |
140 PC JUMPER WIRES KIT FOR SOLDERLESS BREADBOARD | ![]() |
![]() |
US $6.95 | 23d 10h 56m |
![]() |
Thorlabs PBG12118 - UltraLight Series II Breadboard - 2' x 1.5' x 2.2" | ![]() |
![]() |
US $333.00 | 26d 5h 6m |
![]() |
Bring the audio signals to a breadboard DUAL RCA AUDIO | ![]() |
![]() |
US $4.95 | 8d 22h 45m |
![]() |
Heathkit Laboratory Breadboard Model ET-3100 with operation manual (used) | ![]() |
![]() |
US $119.99 | 19d 22h 49m |
![]() |
DB9 EZ Breadboard Adapter .1sp Male Kit with Breadboard - GREAT EDU or for NI | ![]() |
![]() |
US $8.95 | 29d 18h 33m |
| Powered by phpBay Pro |
![]() |
![]() |
Danish Modern Mid Century Teak Bread cutting/serving board by Selandia/Thailand | ![]() |
0 Bid | US $14.99 | 34m |
![]() |
Old Wood Oblong Bread Cutting Chopping Board Kitchen Table Trivet | ![]() |
4 Bids | US $15.50 | 42m |
![]() |
ANTIQUE Breadboard TUBE Radio HORN Parts Speaker ATWATER KENT Model L 1920's | ![]() |
1 Bid | US $17.99 | 1h 6m |
![]() |
5pcs Breadboard prototype PCB 672 holes 70mm X 90mm | ![]() |
0 Bid | US $8.99 | 1h 55m |
![]() |
5pcs Breadboard prototype PCB 784 holes 80mm X 80mm | ![]() |
0 Bid | US $8.99 | 1h 56m |
![]() |
5pcs Breadboard prototype PCB 540 holes 50mm X 100mm | ![]() |
0 Bid | US $7.99 | 1h 59m |
![]() |
5pcs Breadboard prototype PCB 1320 holes 67mm X 147mm | ![]() |
0 Bid | US $13.99 | 2h 8m |
![]() |
5pcs Breadboard prototype PCB 832 holes 68mm X 92mm | ![]() |
0 Bid | US $8.99 | 2h 10m |
![]() |
Solderless Breadboard Jumper Cable Wire Kit Qty 750 | ![]() |
0 Bid | US $41.99 | 2h 11m |
![]() |
1pcs 700 Points Solderless PCB Bread Board Breadboard,w | ![]() |
4 Bids | US $2.05 | 2h 12m |
| Powered by phpBay Pro |
|
|
Stanton Trading Corp Bread Board. Each $10.52 Manufacturer: Stanton Trading Corp. Each. Knife slit to hold bread knife. Knife not included. Customers also search for: Discount Bread Board, Buy Bread Board, Wholesale Bread Board, 67308300314, 69B, Misc |
|
|
Sbriciola Bread Board by Alessi $112 Large slits and a little drawer make slicing bread a much cleaner task. The Alessi Sbriciola Bread Board features a drawer that is separated into two compartments - the smaller one houses the bread knife and is protected from bread crumbs; the second one is the same size as the cutting board for collecting the crumbs. Alessi, known as the Italian design factory, has manufactured household products since 1921. The stylish and fun items offered are the result of contemporary partnerships with some of the world's best designers of unique and modern home accessories. The Alessi Sbriciola Bread Board is available with the following: Details:Made of bambooCrumb catcher in Cream thermoplastic resinDesigned by Anna and Gian Franco GaspariniShipping: This item usually ships within 1-2 business days. Dimensions: Item: Height 1.75 In., Width 16.5 In., Depth 10.75 In. |
|
|
Bread with Butter & Strawberry Jam on Chopping Board $24.99 Bread with Butter & Strawberry Jam on Chopping Board - Photographic Print |
|
|
Slices of Whole Grain Bread on Cutting Board $29.99 Slices of Whole Grain Bread on Cutting Board - Photographic Print |
|
|
igourmet 2-lb. Tapas Collection with Acacia Wood Bread Board and Bowl $79.99 Tapas Collection with Acacia Wood Bread Board and Bowl |
|
|
Bamboo Bread Cutting Board $55.07 This convenient bread cutting board has an open pattern that allows crumbs to fall into tray underneath, keeping your workspace clean. The cutting board is made from durable bamboo and is ideal for cutting and serving breads of any type.Open pattern that allows crumbs to fall into the tray underneathColor: TanDimensions: 14.25 inches long x 8 inches wide x 1.5 inches highMaterials: BambooSuggested cleaning: Hand wash warm water and mild soap |
|
|
Pastry/ Bread Board $187.08 This pastry and bread board is perfect for kneading bread dough, rolling out pizza, pastry and pie dough. The handcrafted durability of this cutting board will be valued for generations.State: IowaBrand: Tableboard by SpinellaTitle: Pastry Board/ Counter Top BoardDimensions: 22 inches tall x 28 inches wide x 0.75 inches deep Materials: Maple hard woodSuggested cleaning: Damp soft clothFinish: One coat applied FDA Approved Mineral OilThis product is part of our 'Main Street Revolution' - a partnership between O.co and small businesses around the USA. What is the Main Street Revolution? Ed Spinella is the founder of the Tableboard Company. Throughout Ed's working career, he created products that he felt everyone could use in the home. The elegant, practical and affordable Tableboard was created in Ed's woodshop on one Saturday morning. He realized when bringing his idea to market he wanted the Tableboard manufactured in the USA, not only for the quality and superior craftsmanship but also to keep business here in the USA. So when it came time to manufacture the Tableboards, there wasn't a decision as to where they would be made. This assures that the customer will receive the quality they expect. The home office and manufacturer are located in Iowa. |
|
|
Bread $19.96 Bread |
|
|
Bread: $25.19 Bread |
|
|
Bread! $10.36 Bread! |
|
|
Round Branded Board With Fresh Bread Design $19.33 Round bread board model 1389 features 12 round surface oil finish Type: Cutting Boards Color: Beige |
|
|
Bauernbrot (German Farm Bread) on Wooden Board with Knife $24.99 Jost Hiller Bauernbrot (German Farm Bread) on Wooden Board with Knife - Photographic Print |
|
|
Loaf of Jewish Challah Bread on Wooden Board with Hebrew Lettering $29.99 Loaf of Jewish Challah Bread on Wooden Board with Hebrew Lettering - Photographic Print |
|
|
Picnic at Ascot CB24 Bread Dip Board SetBamboo $50.49 Grooved bamboo bread cutting board with inset stainless steel bread knife ceramic dish with olive motif and small bamboo spoon. Board includes no slip feet. Material: Bamboo/Ceramic. Dimensions: 1.5 x 18.25 x 7 |
| Account limit of 2098 requests per hour exceeded. |
Introduction to Breadboard (Protoboards), Part 1 of 2
How do you light a single LED on a breadboard?
I have to use all of these materials:
bread board
4 on/off switches (switches which have three feet, contact with wire, whatever that is)
3 gates(74LS08, 74LS32, 74LS04)
and three colored wires(blue, red, black)
and of course the LED..
i will be using a 9volt battery to power it..
or should i use a 1.5volt battery? since i don't have a.. what do you call that? a resistor? capacitor?
well for light a single LED u don't need all that
just a led and a 2*1.5v batteries
don't connect 9v batteries to the LED that will damage the LED
u just need to connect the LED the right way to the battery if u connect it the wrong way it will not light ( won't damage the led )
since u put all the list of comportments their must be a special reason or a special function to it
can u explain what u want to u i can help u
if u don't like to post it on the net send me a mail



































Sorry, comments for this entry are closed at this time.