Beam Kit

Can i install a HID kit without blinding traffic?

I'm considering installing a HID kit, but i don't want to blind traffic.
Is there any fix for that except buying a new DOT approved headlight.
Does the bi-xenon kit fix this issue?
I have a 2008 Ford Focus and it only has 1 bulb for both high/low beam
Thank you

I'm sure they sell double filament hid it's but unfortunatley you will still be blinding traffic unless your headlight has projectors in the headlight if you don't you could try aiming the headlight beam down a bit evey car has an adjustment for headlights try that and goodluck

Beam 50Erk - Kit, Beam 50E $63.51 [BEAM 50ERK] UPC: 86635850

Beam 50Rk-60Rk - Kit,Repair Beam 50 $98.2 [BEAM 50RK-60RK] UPC: 86636700

Beam $10.49 Beam

Fabtech FTS413 I Beam-Radius Arm Kit $521.99 Fabtech FTS413 FTS413 I Beam/Radius Arm Kit;

525 Dual Beam Lamp Kit $544.95 Now you can add power and performance to both your low beam and high beam with the amazing PIAA 525 The combination beam pattern of the 525 offers a world class driving light and fog light in the same housing The sharp cut-off pattern of the low beam safely adds width and distance without offending on-coming drivers Switch on the high beam and add substantial range to your bike's high beam The reversible lens allows the lamp to be mounted up or down Black stamped steel housing and glass lens Kit includes: Wiring harness, relay and switch Sold as a pair

525 Series High Beam/Low Beam Light Kit by PIAA $353.99 Two lamps;Wiring Harness;Relay;Toggle Switch;Black mesh covers;Clear high beam;Plasma ion low beam

Low Balance Beam Adapter Kit from American Athletic, Inc. $218.46 Converts AAI aluminum balance beam core to floor beam.

Standard Dual Beam Transducer $48.94 Standard Dual Beam Transducer PLASTIC, TRANSOM MOUNT TRANSDUCER WITH DEPTH AND TEMPERATURE. OPERATING FREQUENCY OF 200KHZ. BEAMWIDTH OF 20 DEGREES. TRANSDUCER KIT COMES WITH MOUNTING HARDWARE AND INSTALLATION INSTRUCTIONS

Painless Wiring High Beam Headlight Relay Kit $64.99 Increase Light Intensity,Improve The Spread Pattern,Keep All Four Lights On When In High Beam

PIAA 525 DUAL BEAM LIGHT KIT $494.99 Now you can add power and performance to both your low beam and high beam with the amazing PIAA 525The combination beam pattern of the 525 offers a world class driving light and fog light in the same housingThe sharp cut-off pattern of the low beam safely adds width and distance without offending on-coming driversSwitch on the high beam and add substantial range to your bike's high beamThe reversible lens allows the lamp to be mounted up or downBlack stamped steel housing and glass lensKit includes: Wiring harness, relay and switchSold as a pair

Painless Wiring 30802 High Beam Headlight Relay Kit Increase Light Intensity $26.99 Painless Wiring 30802 30802 High Beam Headlight Relay Kit; For Use With or Without Low-Beam Daytime Running Lights;

Dual Beam Trolling Motor Transducer Kit $94.94 Dual Beam Trolling Motor Transducer Kit Mount and Transducer KitThe Mount and Transducer Kits include everything necessary to set up a second mounting station with a dedicated trolling motor transducer.Description: Dual Beam Transducer Kit - includes a XTM 9 20 T, MS M, AND PC 10For Use With: Matrix 10, 12, 15, 17, 20, 27, 67, 77c, 87c, 97, 717, 727, 737, 767, 777, 787, 323, 343, 363, 383, 141, 161, PMax10, PMax15, PMax20, PMax210, PMax215, PMax220, 917c, 931c, 937c, 957c, 997c, 515, 525, 535, 565,580, 585c, 595c, Piranha 2, Piranha 4, XP2000,

Account limit of 2098 requests per hour exceeded.

Airkewld Ultimate 4" Narrowed Beam Air Ride Kit

why is my HID bulb should be in high beam?

Ok so i own a 2000 grand prix GTP, and i installed a 12000k HID kit( low beam) unto it, with the correct installation and wiring. The problem is i always have switch my hi-beam to turn on the light, but if i switch it to low beam then it turns off. I know this doesnt matter since all HID bulbs only has low beam, except if you buy a separate high beam bulb, which wouldn't apply to my car since both low and high beams are in the same bulb. I was just wondering if anyone know what i can to fix it.

Another problem is that the driver side headlight wont turn on until i start the engine and let it run for like 2-3 minutes before it lights up, which is very frustrating, i dont know if this is a problem with the battery or something............?

thanks if you have answered my question.

It sounds to me the quality of your HID kit is substandard. There are big differences in the quality of HID kits on the market. Unfortunately, there are many people who are just here to make a quick buck. Hence they use substandard quality materials to make the kits. The most important part of the kit is the ballast. It's the heart of the system. It's also very complex device. Not only would the performance of the HID kit be affected by substandard ballasts. It could also be dangerous. It's true with the saying "You pay for what you get". I advice you to remove the HID kit from your car ASAP to prevent any irreversible and costly damage to your car.

Check out the blog

http://www.hidledlights.info

for info on HID and LED lights.

With the low beam problem, it sounds like the wire is connected incorrectly if both of the lights don't light up. It is unlikely that both lights have the same fault.